PROPAM® REPAR TECHNO 40 MCI

PROPAM® REPAR TECHNO 40 MCI is a non-shrinkage, single component, thixotropic repair mortar with good adherence and very high mechanical strength, and it is reinforced with fibres and migratory corrosion inhibitor, specially formulated for structurally repairing concrete in aggressive environments. It has CE Marking 2+, for uses in building and civil engineering works of all kinds.

PROPAM® REPAR TECHNO 40 MCI

Description

Additional information

Fields of application

Restoring the concrete to its originally specified shape and function by means of mortar applied manually or by projection (Principle 3 CR, method 3.1 and 3.3 acc. to EN 1504-9).
Structural reinforcement by increasing the bearing capacity of the concrete structures by adding mortar (Principle 4 SS, method 4.4 of EN 1504-9).
Restoring the passivation by increasing the coating with cement mortar and replacing the contaminated or carbonated concrete (Principle 7 RP, methods 7.1 and 7.2 acc. to EN 1504-9).
Humidity control by protection (Principle 2 MC, method 2.3 acc. to EN 1504-9).
Increase in resistivity through impregnation (Principle 8 IR, method 8.2 acc. to EN 1504-9).
Control of the anodic areas by coating the rebar with a barrier coating (Principle 11 CA, method 11.2 acc. to EN 1504-9).
Structural repair of all kinds of elements subject to aggressive environments such as:
– Columns, beams, joists, wrought iron edges and slabs, made with anti-sulphate cements.
– Chimneys, cooling towers or bays, etc.
– Decanters, digesters, purifying plants, etc.
– Tunnels and buried structures in aggressive environments.
– Structures in saline environments or in contact with sea water.
– Rehabilitating building structures.

propiedades

It allows implementing the structural repair with just one product and in one step.
Contains migratory corrosion inhibitors, which increase the protection and durability of the repair.
Sulphate resistant.
High thixotropy, applicable in thicknesses of 2 to 50 mm, manually or by projection.
High mechanical strength.
No shrinkage and reinforced with fibres, it does not crack.
Its accurate granulometry provides a cosmetic finish similar to that of the original concrete.
Free of chlorides, its high pH protects against the corrosion of metal elements, such as rebars, anchorings, etc.
Excellent adhesion strength to concrete, even on substrates that are not very porous.
Impermeable.
Applicable indoors and outdoors.
High resistance to carbonation and the freezing-thawing cycles.
Can be applied by projection.
It withstands temperatures between -50 ºC and +500 ºC.
Excellent workability.

consumo

18 Kg / m2 and cm thickness

Share this product
Share this product

Do you need technical advice?

Customer service +34 936 806 000