Self levelling mortar

Field of application

• The main applications of this mortar include regulating bases and screeds and the levelling of surfaces.
• Compatible with thermal and acoustic insulation.
• Suitable to restore old or poorly maintained paving.
• We have more specific formulations of self-levelling mortars, depending on their use:
  • • C12: regulation bases for floorings made of floating parquet, wood, ceramic products and stone.
    • C20: glue-down parquet flooring, underfloor heating, carpets, vinyl flooring, micro-cements and glue-downs that require greater resistance. Post-application surface treatment is recommended.
    • C25: compression layers during the recovery of slabs. Each case will be studied to adapt the product to the project’s characteristics and the customer’s needs.

  Benefits

  • Easy to application.
  • Daily performance: 400 m2.
  • Curing time: 48 hours.
  • No on-site stocks of cement and sand bags.
  • No need for cranes or forklifts.
  • Controlled dosage.
  • Optimal planimetry of the paving.
  • Full use of the material.
  • As it is pumped, no on-site waste (pallets, plastics, etc.) is generated.

  Application system

  • Cleaning of the support before the mortar is laid: remove curing products, release agents, dust, paints, oils, etc.
  • Laying of the level reference points using laser technology.
  • Placement of a perimeter decoupling device.
  • Pumping and spreading of the mortar.
  • Compaction and deaeration of the paving.
  • Removal of the surface film and dust by mechanical means.
  • The drying time depends on the dampness of the base and the environmental conditions, which are determined by the nature of the material to be applied and the thickness of the application.
  • If adhesives or glues are used, the mortar surface must be brushed by machine or with a spiked steel brush when laying the final coating. At the contractor’s prior request.
  • The paving should not be overloaded in the early stages.
  • Please contact our sales manager for the planimetry requirements.

  Technical characteristics

  Compressive strength UNE-EN 13813	CLASS C12	CLASS C20	CLASS C25
  Maximum aggregate size	4mm	4mm	4mm
  Consistency UNE-EN1015-3	Liquid	Liquid	Liquid
  Density while fresh	1900 kg/m3 +/- 100	2000 kg/m3 +/- 100	2200 kg/m3 +/- 100
  Direct adhesion to the paving	0,20/0,40 N/mm²	0,30/0,80 N/mm²	0,50/1,00 N/mm²
  Flexural strength m. Self-levelling	F3	F5	F7
  Humidity* (under standardised conditions, at 20ºC and 45% hum)	21 days: 5% 28 days: <3%	21 days: 5% 28 days: <3%	21 days: 5% 28 days: <3%

  *Depending on the environmental conditions