DRAGON

CEM II/B-L 32,5N DRAGON cement, manufactured by Molins, is a portland cement with limestone type II/B-L of resistance category 32,5 N. The suitability and regularity of the limestone used and the fineness of the cement give our DRAGON cement the following special features.

TECHNICAL ADVICE

+34 936 806 030
sat.cmt@molins.es

 

LOADING SERVICE

In bulk 24h In bags from 6:00 to 17:00h

DELIVERY

Flexible timetable

Description

Additional information

DESCRIPTION

Our DRAGON is a cement designed principally for use in building.

Its main features are:

• Low water requirement and good workability.
• Lower risk of crecking.

TECHNICAL CHARACTERISTICS

Typical values Specifications according to standard
Clinker (%) 73 min. 65 – max. 79
Limestone (%) 23 min. 21 – max. 35
Minor additional component (%) 4 min. 0 – max. 5
CHEMICAL
Sulphate, SO3 (%) 3,0 max. 3,5
Chloride, Cl- (%) 0,04 max. 0,10
PHYSICAL
Blaine specific surface (cm²/g) 5300
Soundness Le Chatelier (mm) 0,5 max. 10
Initial setting time (min) 150 min. 75
Final setting time (min) 185 max 720
MECHANICAL
7 days compressive strength (MPa) 31 min. 16
28 days compressive strength (MPa) 40 min. 32,5 – max. 52,5

ENVIRONMENTAL NOTE

Since 2009, at our factory in Sant Vicenç dels Horts

(Barcelona), the implementation of new technologies in the production line, the use of alternative fuels, and improvements in the use of additions and grinding additives in our cements have allowed us to achieve a significant reduction in CO₂ emissions.

In this Portland cement, CO₂ emissions have been reduced by more than 30% per ton, calculated for Scope I and compared to our reference cement CEM I 52,5 R from 2020.

This cement is manufactured with clinker aligned with European taxonomy.

Share this product
Share this product