Spain 
Croatia 
Turkey 
Portugal 
Bosnia 
Netherlands 
Argentina 
Mexico 
Colombia 
Uruguay 
Bolivia 
Brazil 
Bangladesh 
Lebanon 
Tunisia 
Angola 
Cape Verde 
Spain
DRAGON AL
CEM II/A-L 42,5R “DRAGÓN-AL” cement manufactured by Cementos Molins is a medium-high strength cement, designed mainly for the ready-mixed concrete and dry mortar sector.
TECHNICAL ADVICE
+34 936 806 030
sat.cmt@molins.es
LOADING SERVICE
Bulk 24h
DELIVERY
Flexible timetable
Additional information
Documents
DESCRIPTION
Our DRAGON AL is a medium-high strength cement, designed principally for the ready mix concrete and dry mix mortar industry.
Its main features are:
• High final mechanical strength
• Low water requirement and good workability.
• Lower risk of cracking.
TECHNICAL CHARACTERISTICS
| Typical values | Specifications according to standard | |
| Clinker (%) | 87 | min. 80 – max. 94 |
| Limestone (%) | 9 | min. 6 – max. 20 |
| Minor additional component (%) | 4 | min. 0 – max. 5 |
| CHEMICAL | ||
| Sulphate, SO3 (%) | 3,0 | max. 4,0 |
| Chloride, Cl- (%) | 0,04 | max. 0,10 |
| PHYSICAL | ||
| Blaine specific surface (cm²/g) | 4.400 | |
| Soundness Le Chatelier (mm) | 0,5 | max. 10 |
| Initial setting time (min) | 150 | min. 60 |
| Final setting time (min) | 185 | max 720 |
| MECHANICAL | ||
| 2 days compressive strength (MPa) | 28 | min. 20,0 |
| 28 days compressive strength (MPa) | 52 | min. 42,5 – max. 62,5 |
ENVIRONMENTAL NOTE
Since 2009, at our factory in Sant Vicenç dels Horts (Barcelona), the implementation of new technologies in the production line, the use of alternative fuels, and improvements in the use of additions and grinding additives in our cements have allowed us to achieve a significant reduction in CO₂ emissions.
In this Portland cement, CO₂ emissions have been reduced by more than 15% per ton, calculated for Scope I and compared to our reference cement CEM I 52,5 R from 2020.
This cement is manufactured with clinker aligned with European taxonomy.
Share this product
Share this product
